AGL
The AGL series of metal separation systems is used to remove all types of metal from glass cullet or glass raw material. The entire material flow is inspected by a metal detector. If metal is detected the evaluation unit activates a reject flap which momentarily diverts the entire material flow into a separate outlet.
DLS
DLS tunnel metal detectors, separable and equipped with digital technology, are used for inspecting bulk materials or individually packaged product on belt conveyors, material slides or vibratory conveyors. DLS metal detection systems detect all ferrous and non-ferrous metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or the reject unit is activated. The system’s robust design offers maximum resistance to interference and ensures it is highly reliable both mechanically and operationally. The fact that it performs equally well under harsh conditions, either for rudimentary detection or for a specific, demanding application is evidence of its versatility and reliability. The size of the detector is dependent upon application, conveyor belt width and product height.
ECOLINE-D
The Metal-Detection System ECOLINE-D detects all – also those contained within the product – magnetic and non-magnet metal impurities. (Steel, Stainless Steel, Aluminum, etc.). ECOLINE-D for the examination of dry packed and non-packed bulk materials. The Complete System contains the following components: • Tunnel-Metal detector GLS • Flat conveyor belt (up to 400 mm belt width) • Conveyor belt Stop-Control at metal detection
EDDY CLEAN 4200 MS
The EDDY CLEAN 4200 MS range of metal separation systems identifies and removes metals eg aluminium, stainless steel and lead from recycled bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The metal is diverted into a separate vertical chute and removed without any interruption to the material flow.
ELCON
The single-face metal detector ELCON is used to inspect poured or bulk materials, preferably of a thin nature, on belt conveyers or material chutes. It detects all magnetic and non-magnetic metal contamination (steel, stainless steel, aluminum...) even if enclosed in the product. On detection of metal, a signal device and a separation system can be activated or a signal can be send to the process controlling.
ELS
The single-layer, single-face ELS detector is used for examining individually packed products and bulk materials on a conveyor belt or a material chute, preferably with a low material height.
EXTRACTOR-J
EXTRACTOR-J inline magnets were developed for use in the plastics industry. They are designed to inspect different granulates at temperatures up to 80° C and with grain sizes up to 10mm in standing or slow-moving columns of material.
EXTRACTOR-SE
EXTRACTOR-SE inline magnets were developed for use in the plastics industry. They are designed to inspect different granulates at temperatures up to 80° C and with grain sizes up to 10mm in standing or slow-moving columns of material. If installed directly at the machine infeed the magnet separator will remove ferrous contaminants from the granulate just before processing.
FLAKE PURIFIER C
The FLAKE PURIFIER C is a colour sorting system, developed to sort PET flakes and used to separate differently coloured PET flake streams into pure colour fractions. The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be combined. In addition to colour separation, the FLAKE PURIFIER can also perform metal separation and contamination detection (e.g. different types of plastics).
FLAKE PURIFIER M
The FLAKE PURIFIER M is a metal separation system, developed to analyse PET flakes and used to separate metal particles. New micro processor technology enables precise localisation of metal particles and separation with minimal loss of good material. The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be combined. In addition to metal separation, the FLAKE PURIFIER can also perform colour separation and contamination detection (e.g. different types of plastics).
FLAKE PURIFIER N
The FLAKE PURIFIER N is a contamination separation system, developed to sort PET flakes and used to separate different types of plastics. PET flakes can now be separated from PVC flakes or organic material such as PLA (previously known to lower the quality of the recycling material dramatically or making high quality recycling impossible). The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be combined. In addition to contamination detection, the FLAKE PURIFIER can also perform colour separation and metal separation.
GF 4000
GF 4000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulate, powder and flour. The rapid-reacting "Quick Flap System" removes contaminated material into a container, without any interruption to the production process, even at high flow rates. The reject container is emptied automatically. The GF 4000 series of metal separation systems are primarily used for quality control in the food, chemical and pharmaceutical industries. All system components have been designed to meet the stringent hygiene standards required in these industries.
GF
GF metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulates and reground material. The rapid-reacting "Quick Flap System" removes contaminated material (and inclusions) into a container, without any interruption to the production process, even at high flow rates. The reject container is emptied automatically. GF metal separation systems are mainly used in industries where hygiene standards are less demanding. They are employed for inspecting dry bulk materials which create little or no product effect.
GLS
GLS closed aperture, tunnel metal detectors are equipped with digital technology and used for inspecting bulk materials or individually packaged product on belt conveyors, material slides or vibratory conveyors. GLS metal detection systems detect all ferrous and non-ferrous metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or the reject unit is activated. The enclosed type of construction ensures that very high sensitivity is achieved throughout the entire tunnel area. For this reason the GLS range is highly suited to precise applications in the food industry. The size of the detector is dependent upon application, conveyor belt width and product height.
GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.
GMT
This magnetic separator is mainly used in the plastics industry to separate ferreous particles. The product to be analysed should be dry,free-flowing and free from long fibred material. The maximum grain size is 6mm and the free fall height is under 1000mm.
LAG 7200 LE-G
The LAG 7200 CSP series of metal separators, used in glass recycling, removes all kinds of non-transparent contaminants eg ceramics, stones and porcelain (CSP) from glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-laser detection system. If a non-transparent contaminant is detected the laser camera determines its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminants are removed with very little loss of cullet. The rest of the cullet, free of contaminants, then continues along the conveyor.
LICON HX
The LICON-HX metal detection system comprises the LIGNUM-HX tunnel metal detector and a heavy-duty conveyor belt. LICON-HX detects driven in nails, shell splinters, cramps, projectiles, broken hooks, or grown in broken chain links. LICON-HX is integrated in the conveyor line between log feeder and saw line. The metal detector features outputs for controlling marker systems, separating units and cut-off saws depending on the application needs.
LIGNUM HX
S+S tunnel metal detectors make an invaluable contribution to safety in sawmills. Timely detection of metallic contaminants in logs prior to processing prevents expensive damage of gate saws, log milling machines, and cut-off saws. LIGNUM-HX detects driven in nails, shell splinters, cramps, projectiles, broken hooks, or grown in broken chain links. LIGNUM-HX is a separate metal detector for integration into existing or new plant. The metal detector features outputs for controlling marker systems, separating units and cut-off saws depending on the application needs.
LIQUIMAG
LIQUIMAG filter magnets were specifically designed and built to remove even the tiniest magnetic metal particles from many different kinds of liquid and paste products
LIQUISCAN VF+
LIQUISCAN VF metal separation systems remove magnetic and non-magnetic impurities (steel, stainless steel, aluminium etc) from pumped, liquid and paste products. It is easily mounted won vacuum fillers and pumps. When metal is detected the valve reject mechanism removes the contaminant into a container. The cut-off air-operated valve is ideally suited for all paste products (sausage meat). The air-operated ball valve is particularly useful in filling applications which contain coarser material (eg ham sausage). LIQUISCAN VF metal separators are supplied mounted on a mobile, height-adjustable stand. The system has a low centre of gravity and is highly stable, even when being moved.
LIQUISCAN PL
LIQUISCAN PL metal separation systems remove magnetic and non-magnetic impurities (steel, stainless steel, aluminium etc) from pumped, liquid and paste products. They are easily integrated in pipeline systems. When metal is detected the valve reject mechanism removes the contaminant into a container. The arc valve is ideally suited for all paste products. The air-operated ball valve is particularly useful in filling applications which contain coarser material. LIQUISCAN PL metal separators are supplied on a stainless steel frame suitable for table or wall mounting. If required they are also available on a mobile, height-adjustable stand.
MAG 4400 ME-G
The MAG 4300 series of metal separators, used in glass recycling, removes metal contaminants eg aluminium, steel or lead from glass cullet. The cullet is widened on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of cullet. The rest of the cullet, free of metal contaminants, then continues along the conveyor.
MAG 4400 ME-P
The MAG 4300 series of metal separators, used in the plastics industry, removes metal contaminants eg aluminium, steel or stainless steel from regranulate. The flow of regranulate is widened on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of good material. The rest of the material, free of metal contaminants, then continues along the conveyor.
MAG 4400 MS
The MAG 4300 MS range of metal separation systems identifies and removes metal contaminants eg aluminium, stainless steel and lead from recycled bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The piece of metal is diverted into a separate vertical chute and removed without any interruption to the material flow.
MAG 4400 ME-W
The MAG 4300 series of metal separators, used in the wood recycling industry, removes metal contaminants eg aluminium, steel or stainless steel from wood chips. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of good material and without any interruption to the material flow.
MAG 4400 ME
The MAG 4300 series of metal separators removes metal contaminants eg aluminium, steel or stainless steel from bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
MAGBOX
MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
MAGBOX AUTO CLEAN
MAGBOX AUTO CLEAN magnet systems are installed in production lines to remove fine and very fine ferrous metal contaminants from various bulk materials. PLC controller enables cleaning intervals to be set depending on level of contamination.
MAGBOX AUTO CLEAN Ex ATEX Ausführung
MAGBOX AUTO CLEAN magnet systems are installed in production lines to remove fine and very fine ferrous metal contaminants from various bulk materials. PLC controller enables cleaning intervals to be set depending on level of contamination.
MAGBOX FOOD
MAGBOX FOOD/PHARMA inline magnet systems are mainly used for highly sensitive applications such as in the food and pharmaceutical industries. The robust and wear-resistant housing is made of rustproof stainless steel (1.4404) All surfaces and welding joints are seamless and highly polished.
MALAG 5200 MLE-G
The MALAG 5200 series of combined metal and CSP separation systems removes not only metals (aluminium, lead etc) but also non-transparent contaminants (ceramics, stones and porcelain) from glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminants are removed with very little loss of cullet. The rest of the cullet, free of contaminants, then continues along the conveyor.
MFE
MFE metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from standing or slow-moving columns of bulk material. They are installed directly above the material infeed of extruders, injection moulding or blow moulding machines. Contaminated material is removed into a reject container by means of a pneumatically operated separating slide. If the MFE metal separator is to be installed at the material infeed or connected to peripheral machines it can be equipped with securing holes and adapter plates.
OM
Overband magnets are equipped with a strong permanent magnet made of fully stabilised strontium-ferrite. The recirculating belt is powered by an attachable gear motor. Ferrous contaminants are picked up and then removed by the circulating belt.
OME
OME electronic overband magnets are installed above conveyor lines to remove ferrous contaminants from other materials. These magnets are so powerful that good results are obtained even with a depth of 700mm thereby protecting downstream processing equipment.
PM
Plate magnets are installed above conveying lines, in free fall, in vertical or inclined pipeline systems, and under slides and slipways, to inspect a continuous flow of material.
PNEUMAG
This inline magnet was especially designed for use in vacuum and pressure pipelines with high conveying speeds (up to 25m/s). Its unique construction enables product to flow both ways within the system.
PRESEP
The metal separation unit PRESEP is used to analyse bulk material highly contaminated with metal particles. First, the granulate passes a magnet system with neodymium high energy magnets on a feeder and vibration chutes. The magnet system separates all Fe metal particles, even Fe dust. The system is equipped with the S+S “Easy Clean” option for simple cleaning. The pre-cleaned material then passes the metal separator RAPID VARIO, which rejects all nonmagnetic metal contaminants. The pure granulate can then be processed further.
PRM
These inline chute magnets are predominantly used for removing ferrous contaminants from fibrous products and materials that do not flow particularly easily and have a tendency to bridge. They are very effective even at high throughput speeds and in pressure conveyor systems.
PROTECTOR
PROTECTOR metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from standing or slow-moving columns of bulk material. They are installed directly above the material infeed of injection moulding machines. The overall height of the PROTECTOR makes it one of the smallest metal separators on the market. It is equipped with S+S' unique patented reject device which temporarily creates a vacuum (Venturi nozzle) to divert contaminated material. If the PROTECTOR is to be installed on an injection moulding machine or connected to peripheral machines it can be equipped with securing holes and adapter plates.
PROTEX R
The PROTEX-R series of metal detectors (with circular aperture) is installed in vacuum and pressure conveying pipesystems for inspecting raw wool and textile fibres. PROTEX-R metal detection systems detect all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). If metal is detected a signal is sent to the process controller or the automatic reject unit is activated.
PROTEX R EASY MOUNT
The PROTEX-R EASY MOUNT series of digital metal detectors (with circular aperture) is installed in vacuum and pressure conveying pipes for inspecting raw wool and textile fibres. PROTEX-R metal detection systems detect all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). If metal is detected a signal is sent to the process controller or the automatic reject unit is activated. EASY MOUNT means that a complete unit is supplied, ready to be installed (consisting of metal detector, antistatic-coated scanning pipe and quick connections). Optionally available is the PROTEX-R AS reject unit which will automatically remove metal contaminants into a container.
PROTEX E
The PROTEX-E range of single face metal detectors is used to inspect web, woven or sheet materials (needle-punched nonwovens, felts, woven and tufted carpets etc) between 1 and 4 metres wide. PROTEX-E systems are equipped with multi-channel metal detectors and detect all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). They provide outstanding detection results, even if the gap between product and sensor surface is quite large. The sensor area is divided into segments which are 256mm wide. If metal is detected a signal can be sent to the process controller, or a marking device or cut-off equipment can be activated. Also available is the option to highlight the segment containing the metal with an LED.
PT
The single-layer, single-face PT detector is used for examining individually packed products and bulk materials on a conveyor belt or a material chute, preferably with a low material height. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even if enclosed in the product.
RAPID 6000
RAPID 6000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from free-falling bulk materials by means of a swivel hopper, without any interruption to the production process. This has proved to be a highly effective method of removal especially for coarse-grained, flaky, light, fibrous, crumbly and moist bulk materials. RAPID 6000 metal separation systems have been specifically designed to meet exacting hygiene standards and are therefore particularly suitable for the food, chemical and pharmaceutical industries.
RAPID 5000
RAPID 5000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from free-falling bulk materials by means of a reject flap ("Quick Flap System") without any interruption to the production process. This has proved to be a highly effective method of removal especially for powders and fine-grained bulk materials. RAPID 5000 metal separation systems have been specifically designed to meet exacting hygiene standards and are therefore particularly suitable for the food, chemical and pharmaceutical industries.
RAPID 8000
■ Metal separator for the inspection of powdery, fibrous and chunky bulk materials ■ Detects magnetic and non-magnetic metal contaminations ■ Separation by way of swivel hopper ■ Dust-proof reject outlet design ■ Hygienic design for easy cleaning ■ Complies with IFS and HACCP The RAPID 8000 metal separator is used for the inspection of bulk materials in free-fall conveyor pipes starting from a nominal width of 200 mm. It detects all magnetic and nonmagnetic metal contaminations (steel, stainless steel, aluminium, ...) - even if such contaminations are embedded in the product. Metal contaminations are rejected by means of a swivel hopper. The reject outlet is of dust-proof design during normal operation. The RAPID 8000 metal separator primarily is used in the food industry in applications with high hygienic demands.
RAPID 4000-FS
The RAPID 4000-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit. The RAPID 4000-FS is used mainly in industries with low hygiene applications.
RAPID DUAL
The RAPID DUAL metal separator detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium, ...), even if such contaminations are enclosed in the product, from free-falling, badly pourable bulk materials.
RAPID VARIO-FS
The RAPID VARIO-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and nonmagnetic metal contaminations (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit. The RAPID VARIO-FS is used mainly in industries with low hygiene applications.
RAYCON BULK
The Product Inspection System RAYCON not only detects varieties of impurities, but simultaneously identifies impurities and product defects, or imperfections. The Product Inspection System RAYCON BULK also detects undesirable, compacted Product- or agglutination of herbs and spices. RAYCON BULK special conveyer for the inspection of loose bulk material with a maximum width of 400 mm and a maximum height of 40 mm. The Complete system is comprised of the following components: • Compact x-ray casing with a high resolution line detector • Steady construction with a task feed hopper • Integrated industrial-PC with sophisticated inspection software • I/O-Board with diverse input and outlet connections to accomodate optional Separation systems, light sensors, etc.
RAYCON
The Product Inspection System RAYCON not only detects varieties of impurities, but simultaneously identifies impurities and product defects, or imperfections. RAYCON is used in dry and wet applications, for the inspection of packed and unpacked bulks (up to a max. conveyer load of 25 kg) with an inspection width of 250 mm up to 400 mm and a product height of up to 200 mm. The Complete system is comprised of the following components: • Compact x-ray casing with a high resolution line detector • Steady construction with a 300 mm or 480 mm wide conveyor belt • Integrated industrial-PC with sophisticated inspection software • I/O-Board with diverse input and outlet connections to accomodate optional Separation systems, light sensors, etc.
RM
RM magnetic separators are designed for use in pipelines to remove ferrous metals from powders and granular bulk materials. The housing as well as the cone top of the core magnet are made of corrosion-resistant stainless steel (1.4301).
RME
RME inline magnets are used in pipelines to remove ferrous metals from bulk materials. This type of magnetic separator uses an electro-magnetic field to attract contaminants. Cleaning the RME is very simple; as soon as the air-operated diverter valve is moved to the “Cleaning” position, a plc disconnects the electro-magnetic field and the attracted contaminants fall off.
ROTOBOX
ROTOBOX rotating magnetic separators are predominantly used to remove fine and very fine ferrous metal contaminants from bulk materials inclined to bridging and caking. The rotating action of the magnetic rods, powered by an electric motor, prevents blockages, thereby ensuring that the product, as it flows through, remains in constant contact with the magnets
ROTOBOX AUTO-CLEAN
ROTOBOX Auto Clean rotating magnetic separator systems are predominantly used to remove fine and very fine ferrous metal contaminants fully automatically from bulk materials tending to bridge and cake. The rotating action of the magnetic rods, powered by an electric motor, prevents blockages, thereby ensuring that the product, as it flows through, remains in constant contact with the magnets.
ROTOBOX AUTO-CLEAN Ex ATEX Ausführung
ROTOBOX rotating magnetic separators are also available with ATEX classification. These are predominantly used to remove fine and very fine ferrous metal contaminants from bulk materials inclined to bridging and caking. The rotating action of the magnetic rods, powered by an electric motor, prevents blockages, thereby ensuring that the product, as it flows through, remains in constant contact with the magnets.
RZ
RZ tunnel metal detectors (with circular aperture) are equipped with digital technology and are mainly used for inspecting bulk materials, fibres or liquids and pastes in pipeline systems (either gravity, airborne or pump feed). They detect all ferrous and non-ferrous metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or a flap is activated to remove the contaminant. The enclosed type of construction ensures that very high sensitivity is achieved throughout the entire tunnel area. For this reason the RZ range is highly suited to high-precision applications eg in the food industry. The size of the metal detector depends on the application and nominal width of the pipeline.
SAFEMAG
The SAFEMAG inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 6-8 mm at a temperature of up to 100°C in standing or slow-moving material columns.
SAFEMAG+PROTECTOR
SAFEMAG+PROTECTOR is the optimal combination for separating magnetic and non-magnetic metal contaminations in plastics processing. It is primarily employed to protect processing machinery. The SAFEMAG magnet separator removes all magnetic contaminations. The PROTECTOR reliably detects and separates all the remaining non-magnetic metals.
SANICON
SANICON is a high performance metal detection system that includes attention to Food Safety within the Sanitary design. SANICON metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product.
SM
Permanent magnetic separator rods can be installed anywhere in the flow of both solid and liquid materials to remove ferrous metals.
SPEKMAG CME-P
The SPEKMAG Series combined color and metal separator CME-P used in plastic recycling industries for the automatic removal of metal (aluminium, lead, etc.) and off-color contaminants from streams of bulk plastic products. The product flow on a conveyer trough and/or glass slide is optimally isolated into the multi-channel detectors area. Appropriate impurities are locally determined within the detection area. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, blowing out impurities of metallic, or false-colored particles with minimal waste, while the conveyer remains uninterrupted.
SPEKMAG CME-G
The SPEKMAG CME-G combined colour and metal separator is designed for use in the glass recycling industry to remove metal (aluminium, lead etc) and off-colour contaminants from streams of glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
SPEKTRUM CE-G
Spektrum colour separation systems are designed for the glass recycling industry to remove off-colours from glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of cullet. The rest of the cullet then continues along the conveyor.
SPEKTRUM CE-P
Spektrum colour separation systems remove off-colours from a flow of plastic bulk materials. The material to be inspected is spread out on a conveyor and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
SPEKTRUM CE
Spektrum colour separation systems identify and remove off-colours from recycled bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of good material. The rest of the cullet then continues along the conveyor.
SPEKTRUM CS-P
SPEKTRUM CS-P colour separation systems identify and remove plastics of different colours. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour.. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
SPEKTRUM CS-G
SPEKTRUM CS-G colour separation systems identify and remove glass cullet of different colours. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the identified pieces of glass into a vertical chute.
SPEKTRUM CS
SPEKTRUM CS colour separation systems identify and remove bulk materials of different colours. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
SPEKTRUM CS-M
SPEKTRUM CS-M colour separation systems identify and remove different coloured metals. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the identified pieces of metal into a vertical chute.
SPEKTRUM CE-M
SPEKTRUM CE-M separation systems in the metal processing industry identify and remove off-colour metals. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that contaminants are diverted into a vertical chute with very little loss of good material. The rest of the material continues along the conveyor.
TEX4000 E
The TEX 4000-E range of single face metal detectors is used to inspect web, woven or sheet materials (needle-punched nonwovens, felts, woven and tufted carpets etc) between 1 and 4 metres wide. TEX 4000-E systems are equipped with multi-channel metal detectors and pinpoint all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). The sensor area is divided into segments which are 250 mm wide. The segment containing the metal is highlighted with an LED. Additionally the machine can be stopped or a marking device or cut-off equipment can be activated.
TM
The drum magnet is an automated separation system. Ferrous contaminants are attracted to the drum magnet and then rotated out of the magnetic field where they fall off the drum and are separated from clean product by a diverter shield (option).
TMG
The drum magnet is an automated separation system. The separator drum is powered by a gear motor and revolutions are controlled via a frequency inverter (option).
UNICON -D
UNICON-D metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The UNICON-D range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • “stop-on-detect” control unit
UNICON -WS
UNICON-WS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The UNICON-WS range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • Automatic activation of reject device if metal detected • reject unit (application-specific)
UNICON -W
UNICON-W metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The UNICON-W range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • “stop-on-detect” control unit
UNICON -DS
UNICON-DS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The UNICON-DS range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • automatic activation of reject device if metal detected • reject unit (application-specific)
VARICON -D
VARICON-D metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The VARICON-D range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • “stop-on-detect” control unit
VARICON -DS
VARICON-DS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The VARICON-DS range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • automatic activation of reject device if metal detected • reject unit (application-specific)
VARICON -W
VARICON-W metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The VARICON-W range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • “stop-on-detect” control unit
VARICON -WS
VARICON-WS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The VARICON-WS range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • automatic activation of reject device if metal detected • reject unit (application-specific)
VARISORT XE-G
Varisort XE-G separation systems are designed to remove all kinds of specialised glass, including high-temperature resistant glass, from glass cullet. The cullet is first spread out on an external feeder and then across an accelerator belt so that the pieces are optimally positioned before they reach the inspection area. If, for example, there is any high-temperature resistant glass present, the detector will identify it and determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of cullet. The rest of the cullet then continues along the conveyor.
VARISORT MS
The Varisort MS range of metal separation systems is used in recycling industries to identify and remove metal contaminants eg aluminium, stainless steel and lead from recycled bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The piece of metal is diverted into a separate vertical chute and removed without any interruption to the material flow.
VARISORT NS-P
The VARISORT NS-P range of polymer separation systems identifies and removes plastics according to infra-red absorption. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the near infra-red detector which identifies the plastics and pinpoints their position. Electronics evaluate the exact location and ejection nozzles are then activated with pinpoint accuracy and at precisely the right time to blow out the relevant material into a vertical chute.
VARISORT ME
The VARISORT ME series of metal separators removes metal contaminants eg aluminium, steel or stainless steel from bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT ME-P
The VARISORT ME-P series of metal separators removes metal contaminants eg cans or foil-lined Tetrapaks from bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT ME-W
The VARISORT ME-W series of metal separators removes metal contaminants eg nails, aluminium and stainless steel from wood chips. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT CE-P
VARISORT CE-P colour separation systems identify and remove off-colours from a flow of discrete plastic items. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of good material and without any interruption to the material flow.
VARISORT CME-P
The VARISORT CME-P combined colour and metal separator is designed for use in the plastics recycling industry to remove metal (cans, foil-lined Tetrapaks etc) and off-colour contaminants (bottles, cups etc) from plastic bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
VARISORT NE-P
VARISORT NE-P polymer separation systems are designed for use in the plastics recycling industry to identify and remove certain types of plastic from others in a bulk material stream. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the near infra-red detector which identifies the plastics and pinpoints their position. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the foreign plastics are removed with very little loss of good material and without any interruption to the material flow.
VARISORT MNE-P
The VARISORT MNE-P combined polymer and metal separator is designed for use in the plastics recycling industry to identify and remove certain types of plastics, as well as metals, from a stream of bulk plastic materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal or plastic contaminants are removed with very little loss of good material. The rest of the material then continues along the conveyor.
VARISORT CS-P
VARISORT CS-P colour separation systems identify and remove plastics of different colours. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
VARISORT CS-M
VARISORT CS-M metal separation systems identify and remove different coloured metals. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate pieces of metal into a vertical chute.
VARISORT SS-M
VARISORT SS-M metal separation systems identify and remove different types of metals. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the selective metal sensor which identifies their type. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate pieces of metal into a vertical chute.
VARISORT CE-W
The color separator VARISORT CE-W automatically separates off-colored impurities from a stream of wood chips and shavings. On a fast moving conveyer belt, the product flow is optimally isolated in the detection area of the CCD line-cameras. Off-colored pieces are locally determined in the detection area. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, blowing out false-colored components with minimal waste, while the conveyer remains uninterrupted.
VARISORT CE-M
VARISORT CE-M metal separation systems are designed for use in the metal processing industry to identify and remove off-colour metals from the metal stream. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the off-colour metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT CME-W
The VARISORT CME-W combined colour and metal separator is designed for use in the preparation and processing of wood chips to remove metal (aluminium, ferrous, stainless steel etc) as well as off-colour contaminants (plastic, bark etc). The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
VARISORT CSS-M
VARISORT CSS-M combined metal separation systems identify and remove different types of metals. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the selective metal sensor and CCD linear camera which identify them according to their physical and optical characteristics. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate pieces of metal into a vertical chute.
VARISORT MSS-M
The combined Metal-Sorting device VARISORT MSS-M sorts two different types of metal, fully automatically. For one: the selective metal search coil identifies certain types of metal with a particle size of more than 20 mm, furthermore, the high-resolution multi-channel metal search coil enables the detection of metals of more than approximately 1 mm. On a fast moving conveyer belt, the product flow is optimally isolated into types of metals once it has reached the detection area of the multi-channel-detector, or in the second operating mode, even the tiniest of metals can be detected. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, guiding metal components into allocated run-off channels.
VARISORT XS-G
The glass sorting device VARISORT XS-G automatically sorts types of glass while recycling. The glass flow, from an external conveyer, reaches an accelerating conveyer belt and is optimally isolated into types when it reaches the sensor detection area. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, guiding broken pieces of glass into allocated run-off channels.
VARISORT CS
VARISORT CS colour separation systems identify and remove bulk materials of different colours. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
WM
Permanent magnetic head rollers are designed to replace the drive roller at the discharge end of belt conveyors. This primary system removes coarse and medium size ferrous contaminants.
The AGL series of metal separation systems is used to remove all types of metal from glass cullet or glass raw material. The entire material flow is inspected by a metal detector. If metal is detected the evaluation unit activates a reject flap which momentarily diverts the entire material flow into a separate outlet.
DLS
DLS tunnel metal detectors, separable and equipped with digital technology, are used for inspecting bulk materials or individually packaged product on belt conveyors, material slides or vibratory conveyors. DLS metal detection systems detect all ferrous and non-ferrous metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or the reject unit is activated. The system’s robust design offers maximum resistance to interference and ensures it is highly reliable both mechanically and operationally. The fact that it performs equally well under harsh conditions, either for rudimentary detection or for a specific, demanding application is evidence of its versatility and reliability. The size of the detector is dependent upon application, conveyor belt width and product height.
ECOLINE-D
The Metal-Detection System ECOLINE-D detects all – also those contained within the product – magnetic and non-magnet metal impurities. (Steel, Stainless Steel, Aluminum, etc.). ECOLINE-D for the examination of dry packed and non-packed bulk materials. The Complete System contains the following components: • Tunnel-Metal detector GLS • Flat conveyor belt (up to 400 mm belt width) • Conveyor belt Stop-Control at metal detection
EDDY CLEAN 4200 MS
The EDDY CLEAN 4200 MS range of metal separation systems identifies and removes metals eg aluminium, stainless steel and lead from recycled bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The metal is diverted into a separate vertical chute and removed without any interruption to the material flow.
ELCON
The single-face metal detector ELCON is used to inspect poured or bulk materials, preferably of a thin nature, on belt conveyers or material chutes. It detects all magnetic and non-magnetic metal contamination (steel, stainless steel, aluminum...) even if enclosed in the product. On detection of metal, a signal device and a separation system can be activated or a signal can be send to the process controlling.
ELS
The single-layer, single-face ELS detector is used for examining individually packed products and bulk materials on a conveyor belt or a material chute, preferably with a low material height.
EXTRACTOR-J
EXTRACTOR-J inline magnets were developed for use in the plastics industry. They are designed to inspect different granulates at temperatures up to 80° C and with grain sizes up to 10mm in standing or slow-moving columns of material.
EXTRACTOR-SE
EXTRACTOR-SE inline magnets were developed for use in the plastics industry. They are designed to inspect different granulates at temperatures up to 80° C and with grain sizes up to 10mm in standing or slow-moving columns of material. If installed directly at the machine infeed the magnet separator will remove ferrous contaminants from the granulate just before processing.
FLAKE PURIFIER C
The FLAKE PURIFIER C is a colour sorting system, developed to sort PET flakes and used to separate differently coloured PET flake streams into pure colour fractions. The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be combined. In addition to colour separation, the FLAKE PURIFIER can also perform metal separation and contamination detection (e.g. different types of plastics).
FLAKE PURIFIER M
The FLAKE PURIFIER M is a metal separation system, developed to analyse PET flakes and used to separate metal particles. New micro processor technology enables precise localisation of metal particles and separation with minimal loss of good material. The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be combined. In addition to metal separation, the FLAKE PURIFIER can also perform colour separation and contamination detection (e.g. different types of plastics).
FLAKE PURIFIER N
The FLAKE PURIFIER N is a contamination separation system, developed to sort PET flakes and used to separate different types of plastics. PET flakes can now be separated from PVC flakes or organic material such as PLA (previously known to lower the quality of the recycling material dramatically or making high quality recycling impossible). The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be combined. In addition to contamination detection, the FLAKE PURIFIER can also perform colour separation and metal separation.
GF 4000
GF 4000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulate, powder and flour. The rapid-reacting "Quick Flap System" removes contaminated material into a container, without any interruption to the production process, even at high flow rates. The reject container is emptied automatically. The GF 4000 series of metal separation systems are primarily used for quality control in the food, chemical and pharmaceutical industries. All system components have been designed to meet the stringent hygiene standards required in these industries.
GF
GF metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulates and reground material. The rapid-reacting "Quick Flap System" removes contaminated material (and inclusions) into a container, without any interruption to the production process, even at high flow rates. The reject container is emptied automatically. GF metal separation systems are mainly used in industries where hygiene standards are less demanding. They are employed for inspecting dry bulk materials which create little or no product effect.
GLS
GLS closed aperture, tunnel metal detectors are equipped with digital technology and used for inspecting bulk materials or individually packaged product on belt conveyors, material slides or vibratory conveyors. GLS metal detection systems detect all ferrous and non-ferrous metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or the reject unit is activated. The enclosed type of construction ensures that very high sensitivity is achieved throughout the entire tunnel area. For this reason the GLS range is highly suited to precise applications in the food industry. The size of the detector is dependent upon application, conveyor belt width and product height.
GM
Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass through the magnetic grid.
GMT
This magnetic separator is mainly used in the plastics industry to separate ferreous particles. The product to be analysed should be dry,free-flowing and free from long fibred material. The maximum grain size is 6mm and the free fall height is under 1000mm.
LAG 7200 LE-G
The LAG 7200 CSP series of metal separators, used in glass recycling, removes all kinds of non-transparent contaminants eg ceramics, stones and porcelain (CSP) from glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-laser detection system. If a non-transparent contaminant is detected the laser camera determines its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminants are removed with very little loss of cullet. The rest of the cullet, free of contaminants, then continues along the conveyor.
LICON HX
The LICON-HX metal detection system comprises the LIGNUM-HX tunnel metal detector and a heavy-duty conveyor belt. LICON-HX detects driven in nails, shell splinters, cramps, projectiles, broken hooks, or grown in broken chain links. LICON-HX is integrated in the conveyor line between log feeder and saw line. The metal detector features outputs for controlling marker systems, separating units and cut-off saws depending on the application needs.
LIGNUM HX
S+S tunnel metal detectors make an invaluable contribution to safety in sawmills. Timely detection of metallic contaminants in logs prior to processing prevents expensive damage of gate saws, log milling machines, and cut-off saws. LIGNUM-HX detects driven in nails, shell splinters, cramps, projectiles, broken hooks, or grown in broken chain links. LIGNUM-HX is a separate metal detector for integration into existing or new plant. The metal detector features outputs for controlling marker systems, separating units and cut-off saws depending on the application needs.
LIQUIMAG
LIQUIMAG filter magnets were specifically designed and built to remove even the tiniest magnetic metal particles from many different kinds of liquid and paste products
LIQUISCAN VF+
LIQUISCAN VF metal separation systems remove magnetic and non-magnetic impurities (steel, stainless steel, aluminium etc) from pumped, liquid and paste products. It is easily mounted won vacuum fillers and pumps. When metal is detected the valve reject mechanism removes the contaminant into a container. The cut-off air-operated valve is ideally suited for all paste products (sausage meat). The air-operated ball valve is particularly useful in filling applications which contain coarser material (eg ham sausage). LIQUISCAN VF metal separators are supplied mounted on a mobile, height-adjustable stand. The system has a low centre of gravity and is highly stable, even when being moved.
LIQUISCAN PL
LIQUISCAN PL metal separation systems remove magnetic and non-magnetic impurities (steel, stainless steel, aluminium etc) from pumped, liquid and paste products. They are easily integrated in pipeline systems. When metal is detected the valve reject mechanism removes the contaminant into a container. The arc valve is ideally suited for all paste products. The air-operated ball valve is particularly useful in filling applications which contain coarser material. LIQUISCAN PL metal separators are supplied on a stainless steel frame suitable for table or wall mounting. If required they are also available on a mobile, height-adjustable stand.
MAG 4400 ME-G
The MAG 4300 series of metal separators, used in glass recycling, removes metal contaminants eg aluminium, steel or lead from glass cullet. The cullet is widened on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of cullet. The rest of the cullet, free of metal contaminants, then continues along the conveyor.
MAG 4400 ME-P
The MAG 4300 series of metal separators, used in the plastics industry, removes metal contaminants eg aluminium, steel or stainless steel from regranulate. The flow of regranulate is widened on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of good material. The rest of the material, free of metal contaminants, then continues along the conveyor.
MAG 4400 MS
The MAG 4300 MS range of metal separation systems identifies and removes metal contaminants eg aluminium, stainless steel and lead from recycled bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The piece of metal is diverted into a separate vertical chute and removed without any interruption to the material flow.
MAG 4400 ME-W
The MAG 4300 series of metal separators, used in the wood recycling industry, removes metal contaminants eg aluminium, steel or stainless steel from wood chips. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of good material and without any interruption to the material flow.
MAG 4400 ME
The MAG 4300 series of metal separators removes metal contaminants eg aluminium, steel or stainless steel from bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
MAGBOX
MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials.
MAGBOX AUTO CLEAN
MAGBOX AUTO CLEAN magnet systems are installed in production lines to remove fine and very fine ferrous metal contaminants from various bulk materials. PLC controller enables cleaning intervals to be set depending on level of contamination.
MAGBOX AUTO CLEAN Ex ATEX Ausführung
MAGBOX AUTO CLEAN magnet systems are installed in production lines to remove fine and very fine ferrous metal contaminants from various bulk materials. PLC controller enables cleaning intervals to be set depending on level of contamination.
MAGBOX FOOD
MAGBOX FOOD/PHARMA inline magnet systems are mainly used for highly sensitive applications such as in the food and pharmaceutical industries. The robust and wear-resistant housing is made of rustproof stainless steel (1.4404) All surfaces and welding joints are seamless and highly polished.
MALAG 5200 MLE-G
The MALAG 5200 series of combined metal and CSP separation systems removes not only metals (aluminium, lead etc) but also non-transparent contaminants (ceramics, stones and porcelain) from glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminants are removed with very little loss of cullet. The rest of the cullet, free of contaminants, then continues along the conveyor.
MFE
MFE metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from standing or slow-moving columns of bulk material. They are installed directly above the material infeed of extruders, injection moulding or blow moulding machines. Contaminated material is removed into a reject container by means of a pneumatically operated separating slide. If the MFE metal separator is to be installed at the material infeed or connected to peripheral machines it can be equipped with securing holes and adapter plates.
OM
Overband magnets are equipped with a strong permanent magnet made of fully stabilised strontium-ferrite. The recirculating belt is powered by an attachable gear motor. Ferrous contaminants are picked up and then removed by the circulating belt.
OME
OME electronic overband magnets are installed above conveyor lines to remove ferrous contaminants from other materials. These magnets are so powerful that good results are obtained even with a depth of 700mm thereby protecting downstream processing equipment.
PM
Plate magnets are installed above conveying lines, in free fall, in vertical or inclined pipeline systems, and under slides and slipways, to inspect a continuous flow of material.
PNEUMAG
This inline magnet was especially designed for use in vacuum and pressure pipelines with high conveying speeds (up to 25m/s). Its unique construction enables product to flow both ways within the system.
PRESEP
The metal separation unit PRESEP is used to analyse bulk material highly contaminated with metal particles. First, the granulate passes a magnet system with neodymium high energy magnets on a feeder and vibration chutes. The magnet system separates all Fe metal particles, even Fe dust. The system is equipped with the S+S “Easy Clean” option for simple cleaning. The pre-cleaned material then passes the metal separator RAPID VARIO, which rejects all nonmagnetic metal contaminants. The pure granulate can then be processed further.
PRM
These inline chute magnets are predominantly used for removing ferrous contaminants from fibrous products and materials that do not flow particularly easily and have a tendency to bridge. They are very effective even at high throughput speeds and in pressure conveyor systems.
PROTECTOR
PROTECTOR metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from standing or slow-moving columns of bulk material. They are installed directly above the material infeed of injection moulding machines. The overall height of the PROTECTOR makes it one of the smallest metal separators on the market. It is equipped with S+S' unique patented reject device which temporarily creates a vacuum (Venturi nozzle) to divert contaminated material. If the PROTECTOR is to be installed on an injection moulding machine or connected to peripheral machines it can be equipped with securing holes and adapter plates.
PROTEX R
The PROTEX-R series of metal detectors (with circular aperture) is installed in vacuum and pressure conveying pipesystems for inspecting raw wool and textile fibres. PROTEX-R metal detection systems detect all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). If metal is detected a signal is sent to the process controller or the automatic reject unit is activated.
PROTEX R EASY MOUNT
The PROTEX-R EASY MOUNT series of digital metal detectors (with circular aperture) is installed in vacuum and pressure conveying pipes for inspecting raw wool and textile fibres. PROTEX-R metal detection systems detect all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). If metal is detected a signal is sent to the process controller or the automatic reject unit is activated. EASY MOUNT means that a complete unit is supplied, ready to be installed (consisting of metal detector, antistatic-coated scanning pipe and quick connections). Optionally available is the PROTEX-R AS reject unit which will automatically remove metal contaminants into a container.
PROTEX E
The PROTEX-E range of single face metal detectors is used to inspect web, woven or sheet materials (needle-punched nonwovens, felts, woven and tufted carpets etc) between 1 and 4 metres wide. PROTEX-E systems are equipped with multi-channel metal detectors and detect all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). They provide outstanding detection results, even if the gap between product and sensor surface is quite large. The sensor area is divided into segments which are 256mm wide. If metal is detected a signal can be sent to the process controller, or a marking device or cut-off equipment can be activated. Also available is the option to highlight the segment containing the metal with an LED.
PT
The single-layer, single-face PT detector is used for examining individually packed products and bulk materials on a conveyor belt or a material chute, preferably with a low material height. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even if enclosed in the product.
RAPID 6000
RAPID 6000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from free-falling bulk materials by means of a swivel hopper, without any interruption to the production process. This has proved to be a highly effective method of removal especially for coarse-grained, flaky, light, fibrous, crumbly and moist bulk materials. RAPID 6000 metal separation systems have been specifically designed to meet exacting hygiene standards and are therefore particularly suitable for the food, chemical and pharmaceutical industries.
RAPID 5000
RAPID 5000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from free-falling bulk materials by means of a reject flap ("Quick Flap System") without any interruption to the production process. This has proved to be a highly effective method of removal especially for powders and fine-grained bulk materials. RAPID 5000 metal separation systems have been specifically designed to meet exacting hygiene standards and are therefore particularly suitable for the food, chemical and pharmaceutical industries.
RAPID 8000
■ Metal separator for the inspection of powdery, fibrous and chunky bulk materials ■ Detects magnetic and non-magnetic metal contaminations ■ Separation by way of swivel hopper ■ Dust-proof reject outlet design ■ Hygienic design for easy cleaning ■ Complies with IFS and HACCP The RAPID 8000 metal separator is used for the inspection of bulk materials in free-fall conveyor pipes starting from a nominal width of 200 mm. It detects all magnetic and nonmagnetic metal contaminations (steel, stainless steel, aluminium, ...) - even if such contaminations are embedded in the product. Metal contaminations are rejected by means of a swivel hopper. The reject outlet is of dust-proof design during normal operation. The RAPID 8000 metal separator primarily is used in the food industry in applications with high hygienic demands.
RAPID 4000-FS
The RAPID 4000-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit. The RAPID 4000-FS is used mainly in industries with low hygiene applications.
RAPID DUAL
The RAPID DUAL metal separator detects all magnetic and non-magnetic metal contaminations (steel, stainless steel, aluminium, ...), even if such contaminations are enclosed in the product, from free-falling, badly pourable bulk materials.
RAPID VARIO-FS
The RAPID VARIO-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and nonmagnetic metal contaminations (steel, stainless steel, aluminium) – even when enclosed in the product. Metal contaminations are rejected through the “Quick Flap” reject unit. The RAPID VARIO-FS is used mainly in industries with low hygiene applications.
RAYCON BULK
The Product Inspection System RAYCON not only detects varieties of impurities, but simultaneously identifies impurities and product defects, or imperfections. The Product Inspection System RAYCON BULK also detects undesirable, compacted Product- or agglutination of herbs and spices. RAYCON BULK special conveyer for the inspection of loose bulk material with a maximum width of 400 mm and a maximum height of 40 mm. The Complete system is comprised of the following components: • Compact x-ray casing with a high resolution line detector • Steady construction with a task feed hopper • Integrated industrial-PC with sophisticated inspection software • I/O-Board with diverse input and outlet connections to accomodate optional Separation systems, light sensors, etc.
RAYCON
The Product Inspection System RAYCON not only detects varieties of impurities, but simultaneously identifies impurities and product defects, or imperfections. RAYCON is used in dry and wet applications, for the inspection of packed and unpacked bulks (up to a max. conveyer load of 25 kg) with an inspection width of 250 mm up to 400 mm and a product height of up to 200 mm. The Complete system is comprised of the following components: • Compact x-ray casing with a high resolution line detector • Steady construction with a 300 mm or 480 mm wide conveyor belt • Integrated industrial-PC with sophisticated inspection software • I/O-Board with diverse input and outlet connections to accomodate optional Separation systems, light sensors, etc.
RM
RM magnetic separators are designed for use in pipelines to remove ferrous metals from powders and granular bulk materials. The housing as well as the cone top of the core magnet are made of corrosion-resistant stainless steel (1.4301).
RME
RME inline magnets are used in pipelines to remove ferrous metals from bulk materials. This type of magnetic separator uses an electro-magnetic field to attract contaminants. Cleaning the RME is very simple; as soon as the air-operated diverter valve is moved to the “Cleaning” position, a plc disconnects the electro-magnetic field and the attracted contaminants fall off.
ROTOBOX
ROTOBOX rotating magnetic separators are predominantly used to remove fine and very fine ferrous metal contaminants from bulk materials inclined to bridging and caking. The rotating action of the magnetic rods, powered by an electric motor, prevents blockages, thereby ensuring that the product, as it flows through, remains in constant contact with the magnets
ROTOBOX AUTO-CLEAN
ROTOBOX Auto Clean rotating magnetic separator systems are predominantly used to remove fine and very fine ferrous metal contaminants fully automatically from bulk materials tending to bridge and cake. The rotating action of the magnetic rods, powered by an electric motor, prevents blockages, thereby ensuring that the product, as it flows through, remains in constant contact with the magnets.
ROTOBOX AUTO-CLEAN Ex ATEX Ausführung
ROTOBOX rotating magnetic separators are also available with ATEX classification. These are predominantly used to remove fine and very fine ferrous metal contaminants from bulk materials inclined to bridging and caking. The rotating action of the magnetic rods, powered by an electric motor, prevents blockages, thereby ensuring that the product, as it flows through, remains in constant contact with the magnets.
RZ
RZ tunnel metal detectors (with circular aperture) are equipped with digital technology and are mainly used for inspecting bulk materials, fibres or liquids and pastes in pipeline systems (either gravity, airborne or pump feed). They detect all ferrous and non-ferrous metals (steel, stainless steel, aluminium etc ), even those which may be contained in the product. If metal is detected a signal is sent to the process controller or a flap is activated to remove the contaminant. The enclosed type of construction ensures that very high sensitivity is achieved throughout the entire tunnel area. For this reason the RZ range is highly suited to high-precision applications eg in the food industry. The size of the metal detector depends on the application and nominal width of the pipeline.
SAFEMAG
The SAFEMAG inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 6-8 mm at a temperature of up to 100°C in standing or slow-moving material columns.
SAFEMAG+PROTECTOR
SAFEMAG+PROTECTOR is the optimal combination for separating magnetic and non-magnetic metal contaminations in plastics processing. It is primarily employed to protect processing machinery. The SAFEMAG magnet separator removes all magnetic contaminations. The PROTECTOR reliably detects and separates all the remaining non-magnetic metals.
SANICON
SANICON is a high performance metal detection system that includes attention to Food Safety within the Sanitary design. SANICON metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product.
SM
Permanent magnetic separator rods can be installed anywhere in the flow of both solid and liquid materials to remove ferrous metals.
SPEKMAG CME-P
The SPEKMAG Series combined color and metal separator CME-P used in plastic recycling industries for the automatic removal of metal (aluminium, lead, etc.) and off-color contaminants from streams of bulk plastic products. The product flow on a conveyer trough and/or glass slide is optimally isolated into the multi-channel detectors area. Appropriate impurities are locally determined within the detection area. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, blowing out impurities of metallic, or false-colored particles with minimal waste, while the conveyer remains uninterrupted.
SPEKMAG CME-G
The SPEKMAG CME-G combined colour and metal separator is designed for use in the glass recycling industry to remove metal (aluminium, lead etc) and off-colour contaminants from streams of glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
SPEKTRUM CE-G
Spektrum colour separation systems are designed for the glass recycling industry to remove off-colours from glass cullet. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of cullet. The rest of the cullet then continues along the conveyor.
SPEKTRUM CE-P
Spektrum colour separation systems remove off-colours from a flow of plastic bulk materials. The material to be inspected is spread out on a conveyor and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
SPEKTRUM CE
Spektrum colour separation systems identify and remove off-colours from recycled bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of good material. The rest of the cullet then continues along the conveyor.
SPEKTRUM CS-P
SPEKTRUM CS-P colour separation systems identify and remove plastics of different colours. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour.. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
SPEKTRUM CS-G
SPEKTRUM CS-G colour separation systems identify and remove glass cullet of different colours. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the identified pieces of glass into a vertical chute.
SPEKTRUM CS
SPEKTRUM CS colour separation systems identify and remove bulk materials of different colours. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
SPEKTRUM CS-M
SPEKTRUM CS-M colour separation systems identify and remove different coloured metals. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the identified pieces of metal into a vertical chute.
SPEKTRUM CE-M
SPEKTRUM CE-M separation systems in the metal processing industry identify and remove off-colour metals. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that contaminants are diverted into a vertical chute with very little loss of good material. The rest of the material continues along the conveyor.
TEX4000 E
The TEX 4000-E range of single face metal detectors is used to inspect web, woven or sheet materials (needle-punched nonwovens, felts, woven and tufted carpets etc) between 1 and 4 metres wide. TEX 4000-E systems are equipped with multi-channel metal detectors and pinpoint all magnetic and non-magnetic metals (steel, stainless steel, aluminium etc). The sensor area is divided into segments which are 250 mm wide. The segment containing the metal is highlighted with an LED. Additionally the machine can be stopped or a marking device or cut-off equipment can be activated.
TM
The drum magnet is an automated separation system. Ferrous contaminants are attracted to the drum magnet and then rotated out of the magnetic field where they fall off the drum and are separated from clean product by a diverter shield (option).
TMG
The drum magnet is an automated separation system. The separator drum is powered by a gear motor and revolutions are controlled via a frequency inverter (option).
UNICON -D
UNICON-D metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The UNICON-D range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • “stop-on-detect” control unit
UNICON -WS
UNICON-WS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The UNICON-WS range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • Automatic activation of reject device if metal detected • reject unit (application-specific)
UNICON -W
UNICON-W metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The UNICON-W range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • “stop-on-detect” control unit
UNICON -DS
UNICON-DS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The UNICON-DS range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 130kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 250mm) • automatic activation of reject device if metal detected • reject unit (application-specific)
VARICON -D
VARICON-D metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The VARICON-D range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • “stop-on-detect” control unit
VARICON -DS
VARICON-DS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The VARICON-DS range is designed for dry area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • automatic activation of reject device if metal detected • reject unit (application-specific)
VARICON -W
VARICON-W metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc ), even those which may be contained in the product. The VARICON-W range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises 4 main components: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • “stop-on-detect” control unit
VARICON -WS
VARICON-WS metal detection systems detect all magnetic and non-magnetic metal contaminants (steel, stainless steel, aluminium etc), even those which may be contained in the product. If metal is detected the affected product is automatically removed from the material flow. The VARICON-WS range is designed for wet area applications for inspecting loose and packaged goods up to a maximum weight of 30 kg. The system comprises: • GLS tunnel metal detector • special conveyor (width of belt from 500 mm) • automatic activation of reject device if metal detected • reject unit (application-specific)
VARISORT XE-G
Varisort XE-G separation systems are designed to remove all kinds of specialised glass, including high-temperature resistant glass, from glass cullet. The cullet is first spread out on an external feeder and then across an accelerator belt so that the pieces are optimally positioned before they reach the inspection area. If, for example, there is any high-temperature resistant glass present, the detector will identify it and determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of cullet. The rest of the cullet then continues along the conveyor.
VARISORT MS
The Varisort MS range of metal separation systems is used in recycling industries to identify and remove metal contaminants eg aluminium, stainless steel and lead from recycled bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The piece of metal is diverted into a separate vertical chute and removed without any interruption to the material flow.
VARISORT NS-P
The VARISORT NS-P range of polymer separation systems identifies and removes plastics according to infra-red absorption. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the near infra-red detector which identifies the plastics and pinpoints their position. Electronics evaluate the exact location and ejection nozzles are then activated with pinpoint accuracy and at precisely the right time to blow out the relevant material into a vertical chute.
VARISORT ME
The VARISORT ME series of metal separators removes metal contaminants eg aluminium, steel or stainless steel from bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT ME-P
The VARISORT ME-P series of metal separators removes metal contaminants eg cans or foil-lined Tetrapaks from bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT ME-W
The VARISORT ME-W series of metal separators removes metal contaminants eg nails, aluminium and stainless steel from wood chips. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT CE-P
VARISORT CE-P colour separation systems identify and remove off-colours from a flow of discrete plastic items. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the contaminant is removed with very little loss of good material and without any interruption to the material flow.
VARISORT CME-P
The VARISORT CME-P combined colour and metal separator is designed for use in the plastics recycling industry to remove metal (cans, foil-lined Tetrapaks etc) and off-colour contaminants (bottles, cups etc) from plastic bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
VARISORT NE-P
VARISORT NE-P polymer separation systems are designed for use in the plastics recycling industry to identify and remove certain types of plastic from others in a bulk material stream. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the near infra-red detector which identifies the plastics and pinpoints their position. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the foreign plastics are removed with very little loss of good material and without any interruption to the material flow.
VARISORT MNE-P
The VARISORT MNE-P combined polymer and metal separator is designed for use in the plastics recycling industry to identify and remove certain types of plastics, as well as metals, from a stream of bulk plastic materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal or plastic contaminants are removed with very little loss of good material. The rest of the material then continues along the conveyor.
VARISORT CS-P
VARISORT CS-P colour separation systems identify and remove plastics of different colours. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
VARISORT CS-M
VARISORT CS-M metal separation systems identify and remove different coloured metals. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate pieces of metal into a vertical chute.
VARISORT SS-M
VARISORT SS-M metal separation systems identify and remove different types of metals. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the selective metal sensor which identifies their type. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate pieces of metal into a vertical chute.
VARISORT CE-W
The color separator VARISORT CE-W automatically separates off-colored impurities from a stream of wood chips and shavings. On a fast moving conveyer belt, the product flow is optimally isolated in the detection area of the CCD line-cameras. Off-colored pieces are locally determined in the detection area. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, blowing out false-colored components with minimal waste, while the conveyer remains uninterrupted.
VARISORT CE-M
VARISORT CE-M metal separation systems are designed for use in the metal processing industry to identify and remove off-colour metals from the metal stream. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the off-colour metal particles are removed with very little loss of good material and without any interruption to the material flow.
VARISORT CME-W
The VARISORT CME-W combined colour and metal separator is designed for use in the preparation and processing of wood chips to remove metal (aluminium, ferrous, stainless steel etc) as well as off-colour contaminants (plastic, bark etc). The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
VARISORT CSS-M
VARISORT CSS-M combined metal separation systems identify and remove different types of metals. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the selective metal sensor and CCD linear camera which identify them according to their physical and optical characteristics. Electronics evaluate their exact location and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate pieces of metal into a vertical chute.
VARISORT MSS-M
The combined Metal-Sorting device VARISORT MSS-M sorts two different types of metal, fully automatically. For one: the selective metal search coil identifies certain types of metal with a particle size of more than 20 mm, furthermore, the high-resolution multi-channel metal search coil enables the detection of metals of more than approximately 1 mm. On a fast moving conveyer belt, the product flow is optimally isolated into types of metals once it has reached the detection area of the multi-channel-detector, or in the second operating mode, even the tiniest of metals can be detected. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, guiding metal components into allocated run-off channels.
VARISORT XS-G
The glass sorting device VARISORT XS-G automatically sorts types of glass while recycling. The glass flow, from an external conveyer, reaches an accelerating conveyer belt and is optimally isolated into types when it reaches the sensor detection area. The evaluation electronic activates the blow-off-systems appropriate nozzles exact time and position, guiding broken pieces of glass into allocated run-off channels.
VARISORT CS
VARISORT CS colour separation systems identify and remove bulk materials of different colours. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before continuing into the inspection area of the CCD linear camera which identifies their colour. Electronics evaluate the exact location of the components and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the appropriate components into a vertical chute.
WM
Permanent magnetic head rollers are designed to replace the drive roller at the discharge end of belt conveyors. This primary system removes coarse and medium size ferrous contaminants.
